|
|
|
Andreas Mortensen
|
|
Laboratoire de métallurgie mécanique
|
|
|
|
MISSION
|
Les activités de recherche et d'enseignement du Laboratoire de Métallurgie Mécanique (LMM) couvrent le champ qui va de l'élaboration au comportement mécanique des matériaux métalliques avancés, tels les composites à matrice métallique, les mousses métalliques et les alliages à hautes performances.
Pour plus d'information cliquez "LMM" parmi tous les acronymes que vous voyez sur votre écran un peu à gauche de ce texte. Cela vous mènera sur le site web de notre laboratoire.
|
|
BIOGRAPHIE
|
Né à San Francisco en 1957, d'origine danoise, Andreas Mortensen obtient son baccalauréat en France en 1975. Il devient élève ingénieur de l'Ecole Nationale Supérieure des Mines de Paris après deux années de classes préparatoires à Versailles, et sera diplômé ingénieur civil en 1980. Il poursuit ensuite ses études dans le Département de Science et Génie des Matériaux du MIT, pour y obtenir son Ph.D. en 1986. Aprés un séjour de cinq mois chez Nippon Steel au Japon, il revient au MIT comme assistant professor. Il y est promu en 1990 et en 1992, et devient professor en 1995.
Il entre en fonction comme professeur au Département des Matériaux de l'EPFL le 1er janvier 1997, pour y être responsable du Laboratoire de métallurgie mécanique (LMM), et y enseigner la métallurgie et le comportement mécanique des matériaux. Il est auteur ou co-auteur de 180 articles scientifiques environ, deux monographes et douze brevets.
|
|
PUBLICATIONS REPRESENTATIVES
|
|
|
D. Empl, V. Laporte, and A. Mortensen.
Measurement and anisotropy of grain boundary energy in Cu-1 wt. PB.
Scripta Materialia, 62:262-265, 2010.
[ Details ]
|
|
|
A. Hauert, A. Rossoll, and A. Mortensen.
Particle fracture in high volume fraction ceramic reinforced metals:
governing parameters and implications for composite failure.
Journal of the Mechanics and Physics of Solids,
57(11):1781-1800, 2009.
[ Details |
Link ]
|
|
|
V. Laporte and A. Mortensen.
Intermediate temperature embrittlement of copper alloys.
International Materials Reviews, 54:94-116, 2009.
[ Details ]
|
|
|
F. Diologent, Y. Conde, R. Goodall, and A. Mortensen.
Microstructure, Strength and Creep of Aluminium-nickel Open
Cell Foam.
Philosophical Magazine, 89(13):1121-1139, 2009.
[ Details ]
|
|
|
F. Diologent, E. Combaz, V. Laporte, R. Goodall, L. Weber, F. Duc, and
A. Mortensen.
Processing of Ag-Cu alloy foam by the replication process.
Scripta Materialia, 61:351-354, 2009.
[ Details ]
|
|
|
A. Hauert, A. Rossoll, and A. Mortensen.
Young's modulus of ceramic particle reinforced aluminium: measurement
by the Impulse Excitation Technique and confrontation with analytical
models.
Composites Part A, 40:524-529, 2009.
[ Details |
Link ]
|
|
|
D. Empl, L. Felberbaum, V. Laporte, D. Chatain, and A. Mortensen.
Dihedral Angles in Cu-1wt. Grain Boundary Triple Line Effects.
Acta Materialia, 57(8):2527-2537, 2009.
[ Details |
Link ]
|
|
|
A. Rossoll, B. Moser, L. Weber, and A. Mortensen.
In situ flow stress of pure aluminium constrained by tightly packed
alumina fibres.
Acta Materialia, 57(6):1795-1812, 2009.
[ Details |
Link ]
|
|
|
F. Diologent, R. Goodall, and A. Mortensen.
Creep of aluminium-magnesium open cell foam.
Acta Materialia, 57:830-837, 2009.
[ Details ]
|
|
|
A. Hauert, A. Rossoll, and A. Mortensen.
Ductile-to-brittle transition in tensile failure of particle
reinforced metals.
Journal of Mechanics and Physics of Solids, 57:473-499,
2009.
[ Details |
Link ]
|
|
|
F. Diologent, R. Goodall, and A. Mortensen.
Surface oxide in replicated microcellular aluminium and its influence
on the plasticity size effect.
Acta Materialia, 57:286-294, 2009.
[ Details ]
|
|
|
A. Rossoll, C. Otto, B. Moser, L. Weber, A. Wanner, and A. Mortensen.
Measurement of damage evolution in continuous ceramic
fibre-reinforced metals by acoustic emission.
Scripta Materialia, 59(8):842-845, 2008.
[ Details |
Link ]
|
|
|
R. Mueller, A. Rossoll, L. Weber, M. A. M. Bourke, D. C. Dunand, and
A. Mortensen.
Tensile flow stress of ceramic particle-reinforced metal in the
presence of particle cracking.
Acta Materialia, 56(16):4402-4416, 2008.
[ Details |
Link ]
|
|
|
J. M. Molina, J. Narciso, L. Weber, A. Mortensen, and E. Louis.
Thermal conductivity of Al-SiC composites with monomodal and
bimodal particle size distribution.
Materials Science And Engineering A-Structural
Materials Properties Microstructure And Processing,
480(1-2):483-488, 2008.
[ Details |
Link ]
|
|
|
J. M. Molina, M. Bahraini, L. Weber, and A. Mortensen.
Direct measurement of drainage curves in infiltration of SiC
particle preforms: influence of interfacial reactivity.
Journal Of Materials Science, 43(15):5061-5067, 2008.
[ Details |
Link ]
|
|
|
A. Marmottant, L. Salvo, C. L. Martin, and A. Mortensen.
Coordination measurements in compacted NaCl irregular powders
using X-ray microtomography.
Journal Of The European Ceramic Society,
28(13):2441-2449, 2008.
[ Details |
Link ]
|
|
|
E. Louis, A. Mortensen, N. Eustathopoulos, and G. Kostorz.
Fifth International Conference on High Temperature
Capillarity HTC-2007, Alicante, Spain Preface.
Materials Science And Engineering A-Structural
Materials Properties Microstructure And Processing, 495(1-2):1-2,
2008.
[ Details |
Link ]
|
|
|
M. Kida, M. Bahraini, J. M. Molina, L. Weber, and A. Mortensen.
High-temperature wettability of aluminum nitride during liquid metal
infiltration.
Materials Science And Engineering A-Structural
Materials Properties Microstructure And Processing,
495(1-2):197-202, 2008.
[ Details |
Link ]
|
|
|
L. Felberbaum, V. Laporte, and A. Mortensen.
Equilibrium shape of a liquid intergranular inclusion in a stressed
elastic solid.
Scripta Materialia, 58(7):610-613, 2008.
[ Details |
Link ]
|
|
|
Y. Conde and A. Mortensen.
Age-hardening Response of Replicated Microcellular Al-4.5 Advanced Engineering Materials, 10(9):849-852, 2008.
[ Details |
Link ]
|
|
|
M. Bahraini, J. M. Molina, L. Weber, and A. Mortensen.
Direct measurement of drainage curves in infiltration of SiC
particle preforms.
Materials Science And Engineering A-Structural
Materials Properties Microstructure And Processing,
495(1-2):203-207, 2008.
[ Details |
Link ]
|
|
|
E. Amsterdam, R. Goodall, A. Mortensen, P. R. Onck, and J. T. M. De Hosson.
Fracture behavior of low-density replicated aluminum alloy foams.
Materials Science And Engineering A-Structural
Materials Properties Microstructure And Processing,
496(1-2):376-382, 2008.
[ Details |
Link ]
|
|
|
R. Mueller, S. Soubielle, R. Goodall, F. Diologent, and A. Mortensen.
On the steady-state creep of microcellular metals.
Scripta Materialia, 57(1):33-36, 2007.
[ Details |
Link ]
|
|
|
J. M. Molina, A. RodrÌguez-Guerrero, M. Bahraini, L. Weber, J. Narciso,
F. RodrÌguez-Reinoso, E. Louis, and A. Mortensen.
Infiltration of graphite preforms with Al-Si eutectic alloy and
mercury.
Scripta Materialia, 56(11):991, 2007.
[ Details |
Link ]
|
|
|
R. Goodall and A. Mortensen.
Microcellular aluminium? child's play!
Advanced Engineering Materials, 9(11):951-954, 2007.
1438-1656.
[ Details ]
|
|
|
R. Goodall, A. Marmottant, L. Salvo, and A. Mortensen.
Spherical pore replicated Microcellular Aluminium.
Materials Science and Engineering A, page in print, 2007.
[ Details ]
|
|
|
J. F. Despois, A. Marmottant, L. Salvo, and A. Mortensen.
Influence of the infiltration pressure on the structure and
properties of replicated aluminium foams.
Materials Science and Engineering: A, In Press, Corrected
Proof, 2007.
[ Details |
Link ]
|
|
|
F. Hodaj, O. Dezellus, J. Barbier, A. Mortensen, and N. Eustathopoulos.
Diffusion-limited reactive wetting: effect of interfacial reaction
behind the advancing triple line.
J. Materials Science, 42(19):8071-8082, 2007.
[ Details ]
|
|
|
V. Michaud and A. Mortensen.
On measuring wettability in infiltration processing.
Scripta Materialia, 56(10):859-862, 2007.
[ Details |
Link ]
|
|
|
J. Narciso, L. Weber, J.M. Molina, A. Mortensen, and E. Louis.
Reactivity and thermal behaviour ofCu-Si/SiC composites:
effects of SiC oxidation.
Materials Science and Technology, 22(12):1464-1468, 2006.
[ Details ]
|
|
|
R. Goodall, L. Weber, and A. Mortensen.
The electrical conductivity of microcellular metals.
Journal Of Applied Physics, 100(4), 2006.
0021-8979 044912.
[ Details ]
|
|
|
R. Goodall, J. F. Despois, and A. Mortensen.
Sintering of NaCl powder: Mechanisms and first stage kinetics.
Journal Of The European Ceramic Society,
26(16):3487-3497, 2006.
0955-2219.
[ Details ]
|
|
|
L. Felberbaum and A. Mortensen.
Capillary shape equilibration of liquid inclusions embedded in a
partly soluble solid.
Scripta Materialia, 55(10):955, 2006.
[ Details |
Link ]
|
|
|
J. F. Despois, R. Mueller, and A. Mortensen.
Uniaxial deformation of microcellular metals.
Acta Materialia, 54(16):4129, 2006.
[ Details |
Link ]
|
|
|
Y. Conde, J.-F. Despois, R. Goodall, A. Marmottant, L. Salvo, C. San Marchi,
and A. Mortensen.
Replication processing of highly porous materials.
ADVANCED ENGINEERING MATERIALS, 8(9):795-803, 2006.
[ Details ]
|
|
|
Y. Conde, A. Pollien, and A. Mortensen.
Functional grading of metal foam cores for yield-limited lightweight
sandwich beams.
Scripta Materialia, 54(4 SPEC. ISS.):539, 2006.
Ecole Polytechnique Federale de Lausanne (EPFL), Laboratory for
Mechanical Metallurgy, Station 12, CH-1015 Lausanne, Switzerland 13596462
(ISSN).
[ Details |
Full Text |
Link ]
|
|
|
R. Goodall, J.-F. Despois, A. Marmottant, L. Salvo, and A. Mortensen.
The effect of preform processing on replicated aluminium foam
structure and mechanical properties.
Scripta Materialia, 54(12):2069, 2006.
[ Details |
Full Text |
Link ]
|
|
|
A. Miserez, R. Mueller, and A. Mortensen.
Increasing the strength/toughness combination of high volume fraction
particulate metal matrixComposites using an Al-Ag matrix alloy.
Advanced Engineering Materials, 8(1-2):56, 2006.
Laboratory for Mechanical Metallurgy, Institute of Materials, Station
12, 1015 Lausanne, Switzerland Materials Department, College of Engineering,
University of California, Santa Barbara, CA 93'106-5050, United States
14381656 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
R. Mueller and A. Mortensen.
Simplified prediction of the monotonic uniaxial stress-strain curve
of non-linear particulate composites.
Acta Materialia, 54(8):2145, 2006.
Ecole Polytechnique Federale de Lausanne (EPFL), Laboratory for
Mechanical Metallurgy, Materials Institute, MX-D 141, Station 12, CH-1015
Lausanne, Switzerland 13596454 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
M. Bahraini, J. M. Molina, M. Kida, L. Weber, J. Narciso, and A. Mortensen.
Measuring and tailoring capillary forces during liquid metal
infiltration.
Current Opinion In Solid State & Materials Science,
9(4-5):196-201, 2005.
1359-0286.
[ Details ]
|
|
|
M. Bahraini, L. Weber, J. Narciso, and A. Mortensen.
Wetting in infiltration of alumina particle preforms with molten
copper.
Journal Of Materials Science, 40(9-10):2487-2491, 2005.
Swiss Fed Inst Technol, EPFL, Lab Mech Met, Inst Mat, CH-1015
Lausanne, Switzerland. Univ Alicante, Dept Inorgan Chem, Alicante, Spain.
[ Details ]
|
|
|
J. F. Despois and A. Mortensen.
Permeability of open-pore microcellular materials.
Acta Materialia, 53(5):1381, 2005.
Laboratory for Mechanical Metallurgy, Department of Materials, Ecl.
Polytech. Federale De L., CH-1015 Lausanne, Switzerland 13596454 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
L. Felberbaum, A. Rossoll, and A. Mortensen.
A stereoscopic method for dihedral angle measurement.
Journal of Materials Science, 40(12):3121, 2005.
Laboratory for Mechanical Metallurgy, Institute of Materials, Swiss
Federal Institute of Technology in Lausanne (EPFL), CH-1015 Lausanne,
Switzerland 00222461 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
B. Moser, L. Weber, and A. Mortensen.
Damage accumulation during cyclic loading of a continuous alumina
fibre reinforced aluminium composite.
Scripta Materialia, 53(10):1111-1115, 2005.
Empa Mat Sci & Technol, Lab Mat Technol Thun, Thun, Switzerland.
EPFL, Lab Mech Met, CH-1015 Lausanne, Switzerland.
[ Details |
Full Text ]
|
|
|
A. Pollien, Y. Conde, L. Pambaguian, and A. Mortensen.
Graded open-cell aluminium foam core sandwich beams.
Materials Science and Engineering A, 404(1-2):9, 2005.
Ecole Polytechnique Federale de Lausanne, Laboratory for Mechanical
Metallurgy, Institut Des Materiaux, Station 12, CH-1015 Lausanne, Switzerland
European Space Agency ESA-ESTEC, Material Mechanics and Processes Section,
Keplerlaan 1, NL-2200 AG Noordwijk ZH, Netherlands 09215093 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
A. Rossoll, B. Moser, and A. Mortensen.
Longitudinal deformation of fibre reinforced metals: Influence of
fibre distribution on stiffness and flow stress.
Mechanics of Materials, 37(1-17):1, 2005.
Laboratory for Mechanical Metallurgy, Ecl. Polytech. Federale de
Lausanne, CH-1015 Lausanne, Switzerland Department of Materials Science, MIT,
Cambridge, MA 02139, United States 01676636 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
R. Tavangar, L. Weber, and A. Mortensen.
Damage evolution in Saffil alumina short-fibre reinforced aluminium
during tensile testing.
Materials Science And Engineering A-Structural
Materials Properties Microstructure And Processing,
395(1-2):27-34, 2005.
Swiss Fed Inst Technol, Lab Mech Met, CH-1015 Lausanne, Switzerland.
Sharif Univ Technol, Mat Res Lab, Tehran, Iran.
[ Details |
Full Text ]
|
|
|
L. Weber, R. Tavangar, and A. Mortensen.
Ductility of Saffil(TM) short fibre reinforced metals.
Scripta Materialia, 53(1):17-21, 2005.
Ecole Polytech Fed Lausanne, Lab Mech Met, CH-1015 Lausanne,
Switzerland. Sharif Univ Technol, Dept Mat Sci & Engn, Tehran, Iran.
[ Details ]
|
|
|
A. Miserez and A. Mortensen.
Fracture of aluminium reinforced with densely packed ceramic
particles: influence of matrix hardening.
Acta Materialia, 52(18):5331-5345, 2004.
Laboratory for Mechanical Metallurgy, Institute of Materials,
Ba?timent des Materiaux, 1006 Lausanne CH1015, Switzerland Materials
Department, College of Engineering, Univ. of California, Santa Barbara,
United States 1359-6454 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
J. F. Despois, Y. Conde, C. S. Marchi, and A. Mortensen.
Tensile behavior of replicated aluminium foams.
Advanced Engineering Materials, 6(6):444, 2004.
Laboratory for Mechanical Metallurgy, Swiss Fed. Inst. Technol.
Lausanne, CH-1015 Lausanne, Switzerland Sandia National Laboratories,
MS-9402, PO Box 969, Livermore, CA 94551-0969, United States 14381656 (ISSN).
[ Details |
Link ]
|
|
|
C. Gaillard, J. F. Despois, and A. Mortensen.
Processing of NaCI powders of controlled size and shape for the
microstructural tailoring of aluminium foams.
Materials Science and Engineering A, 374(1-2):250, 2004.
Ctr Interdisciplin Microsc Electron, Swiss Federal Institute of
Tech., EPFL, Lausanne, CH-1015, Switzerland Laboratory for Mechanical
Metallurgy, Swiss Federal Institute of Tech., EPFL, Lausanne, CH-1015,
Switzerland 09215093 (ISSN) DOI: 10.1016/j.msea.2004.03.015.
[ Details |
Full Text |
Link ]
|
|
|
A. Miserez, R. Mu?ller, A. Rossoll, L. Weber, and A. Mortensen.
Particle reinforced metals of high ceramic content.
Materials Science and Engineering A, 387-389(1-2 SPEC.
ISS.):822, 2004.
Swiss Fed. Inst. Technol. Lausanne, EPFL, CH-1015 Lausanne,
Switzerland Materials Department, College of Engineering, University of
California, Santa Barbara, CA, United States 09215093 (ISSN) DOI:
10.1016/j.msea.2004.05.054.
[ Details |
Link ]
|
|
|
A. Miserez, A. Rossoll, and A. Mortensen.
Investigation of crack-tip plasticity in high volume fraction
particulate metal matrix composites.
Engineering Fracture Mechanics, 71(16-17):2385, 2004.
Laboratory for Mechanical Metallurgy, Institute of Materials, Swiss
Fed. Inst. of Tech. Lausanne, Lausanne 1015, Switzerland 00137944 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
A. Miserez, A. Rossoll, and A. Mortensen.
Fracture of aluminium reinforced with densely packed ceramic
particles: Link between the local and the total work of fracture.
Acta Materialia, 52(5):1337, 2004.
Laboratory for Mechanical Metallurgy, Institute of Materials,
Ba?timent des Materiaux, 1006 Lausanne, Switzerland 13596454 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
B. Moser, A. Rossoll, L. Weber, O. Beffort, and A. Mortensen.
Damage evolution of Nextel 610? alumina fibre reinforced
aluminium.
Acta Materialia, 52(3):573, 2004.
Laboratory for Mechanical Metallurgy, Swiss Fed. Institute of
Technology, EPFL, Lausanne, Switzerland Section Materials Technology, Swiss
Fed. Lab. for Mat. Test./Res., EMPA, Thun, Switzerland Suresh Group, DMSE,
Massachusetts Inst. of Technology, 77 Massachusetts Avenue, Cambridge, MA
02139, United States 13596454 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
J. Pech, M. Braccini, A. Mortensen, and N. Eustathopoulos.
Wetting, interfacial interactions and sticking in glass/steel
systems.
Materials Science And Engineering A-Structural
Materials Properties Microstructure And Processing,
384(1-2):117-128, 2004.
Lab. Thermodyn./Phys.-Chim. Metall., ENSEEG, BP 75 Domaine
Universitaire, 38402 Saint-Martin d'Heres Cedex, France Laboratoire de
Metallurgie Mecanique, Ecole Polytech. Federale de Lausanne, 1015 Lausanne,
Switzerland 0921-5093 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
C. San Marchi, J. F. Despois, and A. Mortensen.
Uniaxial deformation of open-cell aluminum foam: The role of
internal damage.
Acta Materialia, 52(10):2895, 2004.
Laboratory for Mechanical Metallurgy, Institute of Materials, Swiss
Fed. Inst. Technol. Lausanne, CH-1015 Lausanne, Switzerland Sandia National
Laboratories, MS-9402, P.O. Box 969, Livermore, CA 94551-0969, United States
13596454 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
M. Kouzeli, L. Weber, C. San Marchi, and A. Mortensen.
Corrigendum on the tensile behaviour of infiltrated alumina particle
reinforced aluminium composites.
Acta Materialia, 51(20):6493, 2003.
Laboratory for Mechanical Metallurgy, Ecl. Polytech. Fed. di
Lausanne, 1015 Lausanne, Switzerland Sandia National Laboratories, Livermore,
CA 94551, United States 13596454 (ISSN) DOI: 10.1016/S1359-6454(03)00384-7.
[ Details |
Full Text |
Link ]
|
|
|
L. P. Kubin and A. Mortensen.
Geometrically necessary dislocations and strain-gradient plasticity:
A few critical issues.
Scripta Materialia, 48(2):119, 2003.
Lab. d'Etude des Microstructures, CNRS-ONERA, 29 Av. de la Division
Leclerc, 92322 Cha?tillon Cedex, France Labo. de Metallurgie Mecanique,
Institut des Materiaux, Ecole Polytech. Fed. de Lausanne, CH-1015 Lausanne,
Switzerland 13596462 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
A. Miserez, S. Stucklin, A. Rossoll, C. San Marchi, and A. Mortensen.
Influence of heat treatment and particle shape on mechanical
properties of infiltrated Al2O3 particle reinforced Al-2 wt- 18, pg 1461, 2002).
Materials Science And Technology, 19(4):549-550, 2003.
[ Details ]
|
|
|
A. Miserez, S. Stucklin, A. Rossoll, C. San Marchi, and A. Mortensen.
Erratum: Influence of heat treatment and particle shape on
mechanical properties of infiltrated Al2O3 particle reinforced Al-2
wt- (1461-1470)).
Materials Science and Technology, 19(4):549, 2003.
02670836 (ISSN).
[ Details |
Link ]
|
|
|
B. Moser, A. Rossoll, L. Weber, O. Beffort, and A. Mortensen.
Transmitted light microscopy of a fibre reinforced metal.
Journal of Microscopy, 209(1):8-12, 2003.
Laboratory for Mechanical Metallurgy, Swiss Fed. Inst. of Technology
EPFL, Lausanne, Switzerland Section Materials Technology, Swiss Fed. Lab. for
Mat. Test./Res., EMPA, Thun, Switzerland LEXCOM, Massachusetts Inst. of
Technol. MIT, Cambridge, MA, United States 0022-2720 (ISSN) Part 1.
[ Details |
Full Text |
Link ]
|
|
|
B. Moser, L. Weber, A. Rossoll, and A. Mortensen.
The influence of non-linear elasticity on the determination of
Weibull parameters using the fibre bundle tensile test.
Composites Part A: Applied Science and Manufacturing,
34(9):907, 2003.
Laboratory for Mechanical Metallurgy, Swiss Fed. Institute of
Technology, EPFL, Lausanne, Switzerland Swiss Fed. Lab. for Mat. Test./Res.,
EMPA, Thun, Switzerland Suresh Group, Massachusetts Inst. of Technology,
Cambridge, MA 02139, United States 1359835X (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
L. Weber, J. Dorn, and A. Mortensen.
On the electrical conductivity of metal matrix composites containing
high volume fractions of non-conducting inclusions.
Acta Materialia, 51(11):3199-3211, 2003.
Swiss Fed Inst Technol, Lab Mech Met, CH-1015 Lausanne, Switzerland.
[ Details ]
|
|
|
L. Weber, C. Fischer, and A. Mortensen.
On the influence of the shape of randomly oriented, nonconducting
inclusions in a conducting matrix on the effective electrical conductivity.
Acta Materialia, 51(2):495-505, 2003.
Swiss Fed Inst Technol, EPFL, Lab Mech Met, CH-1015 Lausanne,
Switzerland.
[ Details ]
|
|
|
Y. Brechet and A. Mortensen.
Structural materials - Or materials with a structural function.
Actualite Chimique, (3):13-15, 2002.
0151-9093.
[ Details ]
|
|
|
J. Frei, V. Gergely, A. Mortensen, and B. Clyne.
The effect of prior deformation on the foaming behavior of
'FORMGRIP' precursor material.
Advanced Engineering Materials, 4(10):749-752, 2002.
Univ Cambridge, Dept Mat Sci, Cambridge CB2 3QZ, England. Ecole
Polytech Fed Lausanne, Inst Mat, CH-1015 Lausanne, Switzerland.
[ Details |
Full Text |
Link ]
|
|
|
M. Kouzeli and A. Mortensen.
Size dependent strengthening in particle reinforced aluminium.
Acta Materialia, 50(1):39-51, 2002.
Ecole Polytech Fed Lausanne, Lab Mech Met, CH-1015 Lausanne,
Switzerland.
[ Details |
Full Text ]
|
|
|
M. Kouzeli, C. San Marchi, and A. Mortensen.
Effect of reaction on the tensile behavior of infiltrated boron
carbide-aluminum composites.
Materials Science and Engineering A, 337(1-2):264, 2002.
Laboratory for Mechanical Metallurgy, Ecole Polytechnique Fed. de
Lausanne, Lausanne CH-1015, Switzerland Dept. of Materials Sci./Engineering,
Northwestern University, Evanston, IL 60208-3108, United States 09215093
(ISSN) DOI: 10.1016/S0921-5093(02)00039-4.
[ Details |
Full Text |
Link ]
|
|
|
A. Miserez, S. Stucklin, A. Rossoll, C. San Marchi, and A. Mortensen.
Influence of heat treatment and particle shape on mechanical
properties of infiltrated Al2O3 particle reinforced Al-2 wt- Materials Science and Technology, 18(12):1461, 2002.
Nippon Steel Corporation, Research and Engineering Center, Futtsu,
Japan Sandia National Laboratories, Livermore, CA, United States 02670836
(ISSN).
[ Details |
Link ]
|
|
|
C. San Marchi, F. Cao, M. Kouzeli, and A. Mortensen.
Quasistatic and dynamic compression of aluminum-oxide particle
reinforced pure aluminum.
Materials Science and Engineering A, 337(1-2):202, 2002.
Laboratory for Mechanical Metallurgy, EPFL, Lausanne CH-1015,
Switzerland Inner Mongolia Inst. of Metal Res., P.O. Box 4, Baotou,
Inner-Mongolia 014034, China Department of Materials Science/Eng.,
Northwestern University, 2225 N. Campus Dr., Evanston, IL 60208-3018, United
States 09215093 (ISSN) DOI: 10.1016/S0921-5093(02)00035-7.
[ Details |
Full Text |
Link ]
|
|
|
V. Michaud and A. Mortensen.
Infiltration processing of fibre reinforced composites: governing
phenomena.
Composites Part A-Applied Science And
Manufacturing, 32(8):981-996, 2001.
1359-835X Sp. Iss. SI.
[ Details ]
|
|
|
O. Dezellus, F. Hodaj, A. Mortensen, and N. Eustathopoulos.
Diffusion-limited reactive wetting: Spreading of Cu-Sn-Ti
alloys on vitreous carbon.
Scripta Materialia, 44(11):2543-2549, 2001.
L.T.P.C.M., URA-CNRS 29, Inst. National Polytech. de Grenoble,
F-38402 St. Martin-d'Heres, Cedex, France CODEN: SCMAF;.
[ Details |
Full Text |
Link ]
|
|
|
L. Felberbaum, K. Voisey, M. Gaumann, B. Viguier, and A. Mortensen.
Thermal fatigue of single-crystalline superalloy CMSX-4: A
comparison of epitaxial laser-deposited material with the base single
crystal.
Materials Science and Engineering A, 299(1-2):152, 2001.
Lab. de Metall. Mecanique, Department of Materials, Swiss Fed. Inst.
Technol. Lausanne, CH-1015 Lausanne, Switzerland Dept. of Mat. Science and
Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ,
United Kingdom Lab. de Metallurgie Physique, Department of Materials, Swiss
Fed. Inst. Technol. Lausanne, CH-1015 Lausanne, Switzerland Calcom SA,
CH-1015 Lausanne, Switzerland Ctr. Interuniv. Rech. d'I., CNRS-ENSCT-INP,
F-31077 Toulouse Cedex 4, France 09215093 (ISSN) CODEN: MSAPE; DOI:
10.1016/S0921-5093(00)01378-2.
[ Details |
Full Text |
Link ]
|
|
|
M. Kouzeli, L. Weber, C. San Marchi, and A. Mortensen.
Influence of damage on the tensile behaviour of pure aluminium
reinforced with ?40 vol. pct alumina particles.
Acta Materialia, 49(18):3699, 2001.
Laboratory for Mechanical Metallurgy, Ecole Polytech. Federale de
Lausanne, 1015 Lausanne, Switzerland 13596454 (ISSN) DOI:
10.1016/S1359-6454(01)00279-8.
[ Details |
Full Text |
Link ]
|
|
|
M. Kouzeli, L. Weber, C. San Marchi, and A. Mortensen.
Quantification of microdamage phenomena during tensile straining of
high volume fraction particle reinforced aluminum.
Acta Materialia, 49(3):497-505, 2001.
Laboratory for Mechanical Metallurgy, Swiss Fed. Inst. of Technology,
1015, Lausanne, Switzerland 1359-6454 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
A. Mortensen, B. Drevet, and N. Eustathopoulos.
Reply to 'Kinetics of reactive wetting'.
Scripta Materialia, 45(8):953, 2001.
Department of Materials, Swiss Federal Inst. of Technology, EPFL,
MX-D Ecublens, CH-1015 Lausanne, Switzerland 13596462 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
B. Moser, A. Rossoll, L. Weber, O. Beffort, and A. Mortensen.
Nextel? 610 alumina fibre reinforced aluminium: Influence of
matrix and process on flow stress.
Composites - Part A: Applied Science and
Manufacturing, 32(8):1067, 2001.
Laboratory for Mechanical Metallurgy, Swiss Fed. Institute of
Technology, 1015 Lausanne, Switzerland 1359835X (ISSN).
[ Details |
Link ]
|
|
|
C. San Marchi and A. Mortensen.
Deformation of open-cell aluminum foam.
Acta Materialia, 49(19):3959, 2001.
Laboratory of Mechanical Metallurgy, Swiss Federal Inst. of
Technology, Ecole Polytech. Federale de Lausanne, CH-1015 Lausanne,
Switzerland 13596454 (ISSN) DOI: 10.1016/S1359-6454(01)00294-4.
[ Details |
Full Text |
Link ]
|
|
|
B. Viguier and A. Mortensen.
Heating of TEM specimens during ion milling.
Ultramicroscopy, 87(3):123, 2001.
CIRIMAT, Laboratoire Interfaces/Materiaux, Ecole National Superieure
de Chimie, 118 Route de Narbonne, 31077 Toulouse Cedex 4, France 03043991
(ISSN).
[ Details |
Full Text |
Link ]
|
|
|
T. J. Grant, L. Weber, and A. Mortensen.
Plasticity in Chevron-notch fracture toughness testing.
Engineering Fracture Mechanics, 67(3):263, 2000.
Lab. of Mechanical Metallurgy, Department of Materials, Swiss Federal
Institute of Tech., MX-D Ecublens, CH-1015 Lausanne, Switzerland 00137944
(ISSN) CODEN: EFMEA; DOI: 10.1016/S0013-7944(00)00061-8.
[ Details |
Full Text |
Link ]
|
|
|
E. E. Nugent, R. B. Calhoun, and A. Mortensen.
Experimental investigation of stress and strain fields in a ductile
matrix surrounding an elastic inclusion.
Acta Materialia, 48(7):1451, 2000.
Dept. of Mat. Sci. and Engineering, Massachusetts Inst. of
Technology, Cambridge, MA 02139, United States 13596454 (ISSN) CODEN: 00220;
DOI: 10.1016/S1359-6454(99)00444-9.
[ Details |
Full Text |
Link ]
|
|
|
C. San Marchi, L. Felberbaum, and A. Mortensen.
The effect of gravity on solution-reprecipitation during liquid phase
sintering.
Metallurgical And Materials Transactions A-Physical
Metallurgy And Materials Science, 31(2):397-400, 2000.
Swiss Fed Inst Technol, Dept Mat, Lab Mech Met, CH-1015 Lausanne,
Switzerland.
[ Details ]
|
|
|
L. Weber, P. Canalis-Nieto, A. Rossoll, and A. Mortensen.
Fracture strength of alumina fiber reinforced aluminum wire with and
without a torsional pre-strain.
Acta Materialia, 48(12):3235, 2000.
Laboratory for Mechanical Metallurgy, Swiss Fed. Inst. Technol. L.,
Lausanne, Switzerland 13596454 (ISSN) CODEN: 00220; DOI:
10.1016/S1359-6454(00)00112-9.
[ Details |
Link ]
|
|
|
L. Weber, B. Moser, H. U. Ku?nzi, and A. Mortensen.
Swift and inverse swift effect in alumina fiber reinforced aluminum
wires.
Acta Materialia, 48(10):2451, 2000.
Laboratory for Mechanical Metallurgy, Swiss Fed. Inst. Technol. L.,
Lausanne, Switzerland 13596454 (ISSN) CODEN: 00220; DOI:
10.1016/S1359-6454(00)00080-X.
[ Details |
Link ]
|
|
|
P. Bystricky, H. Bjerregard, and A. Mortensen.
Plasticity of continuous fiber-reinforced metals.
Metallurgical and Materials Transactions A: Physical
Metallurgy and Materials Science, 30(7):1843, 1999.
Department of Materials Science and Engineering, Massachusetts
Institute of Technology CeraNova Corporation, Franklin, MA 02038, United
States Materials Department, Ris¯ National Laboratory, Roskilde DK-4000,
Denmark Danisco Sugar, DK-1001 Copenhagen K, Denmark Department of Materials
Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA
02139, United States Department of Materials, Swiss Federal Institute of
Technology in Lausanne, CH-1015 Lausanne, Switzerland 10735623 (ISSN).
[ Details |
Link ]
|
|
|
R. B. Calhoun and A. Mortensen.
Equilibrium shape of prismatic dislocation loops under uniform
stress.
Acta Materialia, 47(8):2357, 1999.
Massachusetts Inst. of Technology, Cambridge, MA 02139, United States
13596454 (ISSN) DOI: 10.1016/S1359-6454(99)00118-4.
[ Details |
Full Text |
Link ]
|
|
|
V. J. Michaud, J. L. Sommer, and A. Mortensen.
Infiltration of fibrous preforms by a pure metal: Part V.
influence of preform compressibility.
Metallurgical And Materials Transactions A-Physical
Metallurgy And Materials Science, 30(2):471-482, 1999.
Swiss Fed Inst Technol, Polmer & Composite Technol Lab, Dept Mat,
CH-1015 Lausanne, Switzerland. Swiss Fed Inst Technol, Mech Met Lab, Dept
Mat, CH-1015 Lausanne, Switzerland. MIT, Dept Mat Sci & Engn, Cambridge, MA
02139 USA. Tech Res Associates, Salt Lake City, UT 84106 USA.
[ Details |
Full Text ]
|
|
|
M. Roulin, J. W. Luster, G. Karadeniz, and A. Mortensen.
Strength and structure of furnace-brazed joints between aluminum and
stainless steel.
Welding Journal (Miami, Fla), 78(5), 1999.
Lab. de Metall. Mecanique, Dept. des Materiaux, Swiss Fed. Institute
of Technology, Lausanne, Switzerland Castolin S.A., St. Sulpice, Switzerland
00432296 (ISSN).
[ Details |
Link ]
|
|
|
R. Voitovitch, A. Mortensen, F. Hodaj, and N. Eustathopoulos.
Diffusion-limited reactive wetting: Study of spreading kinetics of
Cu-Cr alloys on carbon substrates.
Acta Materialia, 47(4):1117, 1999.
Inst. Natl. Polytech. de Grenoble, ENSEEG, Lab. Thermodyn. Phys.-C.,
Saint Martin d'Heres, France Department of Materials, Swiss Fed. Inst.
Technol. L., Lausanne, Switzerland 13596454 (ISSN) DOI:
10.1016/S1359-6454(99)00008-7.
[ Details |
Full Text |
Link ]
|
|
|
L. Weber, M. Kouzeli, C. San Marchi, and A. Mortensen.
On the use of considere's criterion in tensile testing of materials
which accumulate internal damage.
Scripta Materialia, 41(5):549, 1999.
Laboratory for Mechanical Metallurgy, Swiss Inst. Technol. Lausanne,
C., Lausanne, Switzerland 13596462 (ISSN) CODEN: SCMAF; DOI:
10.1016/S1359-6462(99)00159-1.
[ Details |
Link ]
|
|
|
C. S. Marchi and A. Mortensen.
Reactive infiltration processing of aluminum-nickel intermetallic
compounds.
Metallurgical And Materials Transactions A-Physical
Metallurgy And Materials Science, 29(11):2819-2828, 1998.
MIT, Dept Mat Sci & Engn, Cambridge, MA 02139 USA. Swiss Fed Inst
Technol, Dept Mat, Lab Mech Mat, CH-1015 Lausanne, Switzerland.
[ Details ]
|
|
|
A. Mortensen, F. Hodaj, and N. Eustathopoulos.
On thermal effects in reactive wetting.
Scripta Materialia, 38(9):1411, 1998.
Departement of Materials, Massachusetts Inst. of Technology,
Cambridge, MA, United States LTPCM-INP Grenoble, UJF, URA 29, BP 75, 38402,
Saint Martin d'Heres, Cedex, France Departement of Materials, Swiss Fed.
Inst. of Technol. (EPFL), CH-1015, Lausanne, Switzerland 13596462 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
A. Mortensen, O. B. Pedersen, and H. Lilholt.
On the work hardening of fiber reinforced copper.
Scripta Materialia, 38(7):1109, 1998.
Dept. of Mat. Sci. and Engineering, Massachusetts Inst. of
Technology, Cambridge, MA, United States Materials Department, Ris¯ National
Laboratory, P.O. Box 49, DK-4000, Roskilde, Denmark Department of Materials,
Swiss Fed. Institute of Technology, CH-1015, Lausanne, Switzerland 13596462
(ISSN).
[ Details |
Full Text |
Link ]
|
|
|
S. Elomari, R. Boukhili, C. San Marchi, A. Mortensen, and D. J. Lloyd.
Thermal expansion responses of pressure infiltrated SiC/Al
metal-matrix composites.
Journal of Materials Science, 32(8):2131, 1997.
Spacecraft Engineering, Canadian Space Agency, Saint-Hubert, Que. J3Y
8Y9, Canada Department of Mechanical Engineering, Montreal Polytechnic
School, Montreal, Que., Canada Dept. of Mat. Sci. and Engineering,
Massachusetts Inst. of Technology, Cambridge, MA, United States Alcan
International Limited, Kingston R. and D. Centre, Kingston, Ont., Canada
Massachusetts Inst. of Technology 00222461 (ISSN).
[ Details |
Link ]
|
|
|
A. Mortensen.
Kinetics of densification by solution-reprecipitation.
Acta Materialia, 45(2):749-758, 1997.
Ecole natl super mines,ctr mat pierre marie fourt,corbeil
essonnes,france.
[ Details |
Full Text ]
|
|
|
A. Mortensen, B. Drevet, and N. Eustathopoulos.
Kinetics of diffusion-limited spreading of sessile drops in reactive
wetting.
Scripta Materialia, 36(6):645, 1997.
Dept. of Mat. Sci. and Engineering, Massachusetts Inst. of
Technology, Cambridge, MA 021339-4307, United States CEA
Grenoble/DTA/CEREM/DEM/SPCM, 17 rue des Martyrs, 38054, Grenoble, Cedex,
France L.T.P.C.M., URA-CNRS 29, Inst. Natl. Polytech. de Grenoble, 38402, St
Martin-d'Heres, Cedex, France 13596462 (ISSN).
[ Details |
Full Text |
Link ]
|
|
|
A. Sundarrajan, A. Mortensen, T. Z. Kattamis, and M. C. Flemings.
Kinetic undercooling in solidification of a hypereutectic Al-Si
alloy; Effect of solidifying within a ceramic preform composite.
Acta Materialia, 46(1):91-99, 1997.
MIT, Ctr Mat Sci & Engn, Cambridge, MA 02139 USA. Univ Connecticut,
Dept Met, Storrs, CT 06268 USA.
[ Details |
Full Text ]
|
|
|
S. Suresh and A. Mortensen.
Functionally graded metals and metal-ceramic composites .2.
thermomechanical behaviour.
International Materials Reviews, 42(3):85-116, 1997.
Swiss fed inst technol,dept mat,lab met mecan,epfl,ch-1015
lausanne,switzerland.
[ Details ]
|
|
|
D. K. Balch, T. J. Fitzgerald, V. J. Michaud, A. Mortensen, Y. L. Shen, and
S. Suresh.
Thermal expansion of metals reinforced with ceramic particles and
microcellular foams.
Metallurgical And Materials Transactions A-Physical
Metallurgy And Materials Science, 27(11):3700-3717, 1996.
Mit,dept mat sci & engn,cambridge,ma 02139. westinghouse elect
corp,orlando,fl 32826. ecole cent paris,lab mecan sols struct & mat,f-92295
chatenay malabry,france.
[ Details ]
|
|
|
|
Professeur ordinaire 